qmk_sweep_skeletyl/docs/compatible_microcontrollers.md, branch master

Added MCU support for ArteryTek AT32F415 (#23445)

2024-11-21T06:28:28+00:00

Remove `arm_atsam` platform (#24337)

2024-09-02T02:48:17+00:00

Vitepress conversion of docs. (#23795)

2024-05-30T02:00:41+00:00

STM32H723 support (#21352)

2023-06-28T03:07:14+00:00

Tentative Teensy 3.5 support (#14420)

2022-07-02T14:12:45+00:00

* Tentative Teensy 3.5 support * Set firmware format to .hex for ARM Teensys * Got to "device descriptor failed" by comparing with Teensy 3.6 code * Drop down to 96MHz... * Bump back up to 120MHz

[Core] Add Raspberry Pi RP2040 support (#14877)

2022-06-30T11:19:27+00:00

* Disable RESET keycode because of naming conflicts * Add Pico SDK as submodule * Add RP2040 build support to QMK * Adjust USB endpoint structs for RP2040 * Add RP2040 bootloader and double-tap reset routine * Add generic and pro micro RP2040 boards * Add RP2040 onekey keyboard * Add WS2812 PIO DMA enabled driver and documentation Supports regular and open-drain output configuration. RP2040 GPIOs are sadly not 5V tolerant, so this is a bit use-less or needs extra hardware or you take the risk to fry your hardware. * Adjust SIO Driver for RP2040 * Adjust I2C Driver for RP2040 * Adjust SPI Driver for RP2040 * Add PIO serial driver and documentation * Add general RP2040 documentation * Apply suggestions from code review Co-authored-by: Nick Brassel Co-authored-by: Nick Brassel

Inform people that things may not work. (#17391)

2022-06-14T10:15:01+00:00

Added support for Wb32fq95 (#16871)

2022-05-23T05:57:24+00:00

Add L432, L442. (#16016)

2022-01-23T21:49:36+00:00

Add example implementations for compatible MCUs list (#15935)

2022-01-19T09:34:59+00:00

* Add example implementations for compatible MCUs list * Update docs/compatible_microcontrollers.md Co-authored-by: Nick Brassel Co-authored-by: Nick Brassel