From 39324e642f000c86a46d1974651e7a474d9375d8 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Thu, 15 Aug 2024 14:37:27 +0100 Subject: Update Discord URL (#24283) --- docs/newbs_flashing.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'docs/newbs_flashing.md') diff --git a/docs/newbs_flashing.md b/docs/newbs_flashing.md index e9df397267..5d5c1983e1 100644 --- a/docs/newbs_flashing.md +++ b/docs/newbs_flashing.md @@ -15,7 +15,7 @@ Different keyboards have different ways to enter this special mode. If your PCB * Press the physical `RESET` button, usually located on the underside of the PCB * Locate header pins on the PCB labeled `RESET` and `GND`, and short them together while plugging your PCB in -If you've attempted all of the above to no avail, and the main chip on the board says `STM32` or `RP2-B1` on it, this may be a bit more complicated. Generally your best bet is to ask on [Discord](https://discord.gg/Uq7gcHh) for assistance. It's likely some photos of the board will be asked for -- if you can get them ready beforehand it'll help move things along! +If you've attempted all of the above to no avail, and the main chip on the board says `STM32` or `RP2-B1` on it, this may be a bit more complicated. Generally your best bet is to ask on [Discord](https://discord.gg/qmk) for assistance. It's likely some photos of the board will be asked for -- if you can get them ready beforehand it'll help move things along! Otherwise, you should see a message in yellow, similar to this in QMK Toolbox: @@ -129,4 +129,4 @@ Congrats! Your custom firmware has been programmed to your keyboard and you're r With a little bit of luck everything will work perfectly, but if not there are steps that will help you figure out what's wrong. Testing your keyboard is usually pretty straightforward. Press every single key and make sure it sends the keys you expect. You can use [QMK Configurator](https://config.qmk.fm/#/test/)'s test mode to check your keyboard, even if it doesn't run QMK. -Still not working? Browse the FAQ topics for more information, or [chat with us on Discord](https://discord.gg/Uq7gcHh). +Still not working? Browse the FAQ topics for more information, or [chat with us on Discord](https://discord.gg/qmk). -- cgit v1.2.3