From b867522f8cf90aef6f4531e669e35aba5ec0bf1c Mon Sep 17 00:00:00 2001
From: Ryan
Date: Tue, 31 Jan 2023 07:45:41 +1100
Subject: Clean up Force NKRO in config.h (#19718)

---
 keyboards/draytronics/daisy/config.h   | 21 +--------------------
 keyboards/draytronics/scarlet/config.h | 21 +--------------------
 2 files changed, 2 insertions(+), 40 deletions(-)

(limited to 'keyboards/draytronics')

diff --git a/keyboards/draytronics/daisy/config.h b/keyboards/draytronics/daisy/config.h
index cb51c4f9ff..19bce725d2 100644
--- a/keyboards/draytronics/daisy/config.h
+++ b/keyboards/draytronics/daisy/config.h
@@ -54,26 +54,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
  */
 //#define GRAVE_ESC_CTRL_OVERRIDE
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
+
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/draytronics/scarlet/config.h b/keyboards/draytronics/scarlet/config.h
index b53843147f..e97df3b0df 100644
--- a/keyboards/draytronics/scarlet/config.h
+++ b/keyboards/draytronics/scarlet/config.h
@@ -52,26 +52,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
  */
 //#define GRAVE_ESC_CTRL_OVERRIDE
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
+
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
-- 
cgit v1.2.3