From b9078609b649ff40f725233d628d2854977366f2 Mon Sep 17 00:00:00 2001
From: jacksaxi
Date: Mon, 6 Oct 2025 19:44:26 +0300
Subject: Add Printronics Mectechpad (#25365)

---
 keyboards/mectechpad/readme.md | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 keyboards/mectechpad/readme.md

(limited to 'keyboards/mectechpad/readme.md')

diff --git a/keyboards/mectechpad/readme.md b/keyboards/mectechpad/readme.md
new file mode 100644
index 0000000000..515326baab
--- /dev/null
+++ b/keyboards/mectechpad/readme.md
@@ -0,0 +1,25 @@
+# Mectechpad
+
+![Mectechpad](https://i.imgur.com/fNnLVLf.jpeg)
+
+* Keyboard Maintainer: [Jack Sachinidhs](https://github.com/jacksaxi)
+* Hardware Supported: rp2040
+* Hardware Availability: [Printronics Website](https://printronics.gr)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make mectechpad:default
+
+Flashing example for this keyboard:
+
+    make mectechpad:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
-- 
cgit v1.2.3