From cf4575b94a3c65e6535a159fc71fc885aebc2620 Mon Sep 17 00:00:00 2001
From: Drashna Jaelre
Date: Fri, 2 Aug 2019 14:02:40 -0700
Subject: Fix the LUFA lib to use a submodule instead of just files (#6245)
* Remove LUFA files
* Update descriptions for newer version of LUFA
* Create PR6245.md
* Fix CDC(Serial) type errors
* Fix missed merge conflict for AUDIO_DTYPE_CSInterface
---
lib/lufa/Projects/USBtoSerial/USBtoSerial.txt | 78 ---------------------------
1 file changed, 78 deletions(-)
delete mode 100644 lib/lufa/Projects/USBtoSerial/USBtoSerial.txt
(limited to 'lib/lufa/Projects/USBtoSerial/USBtoSerial.txt')
diff --git a/lib/lufa/Projects/USBtoSerial/USBtoSerial.txt b/lib/lufa/Projects/USBtoSerial/USBtoSerial.txt
deleted file mode 100644
index 0620f93938..0000000000
--- a/lib/lufa/Projects/USBtoSerial/USBtoSerial.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \mainpage USB to Serial Converter Project
- *
- * \section Sec_Compat Project Compatibility:
- *
- * The following list indicates what microcontrollers are compatible with this project.
- *
- * \li Series 7 USB AVRs (AT90USBxxx7)
- * \li Series 6 USB AVRs (AT90USBxxx6)
- * \li Series 4 USB AVRs (ATMEGAxxU4)
- * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *
- * \section Sec_Info USB Information:
- *
- * The following table gives a rundown of the USB utilization of this project.
- *
- *
- *
- *
USB Mode:
- *
Device
- *
- *
- *
USB Class:
- *
Communications Device Class (CDC)
- *
- *
- *
USB Subclass:
- *
Abstract Control Model (ACM)
- *
- *
- *
Relevant Standards:
- *
USBIF CDC Class Standard
- *
- *
- *
Supported USB Speeds:
- *
Full Speed Mode
- *
- *
- *
- * \section Sec_Description Project Description:
- *
- * USB to Serial bridge project. This project allows a USB AVR to serve
- * as a USB to USART bridge between a USB host and a device lacking a
- * USB port. When programmed into a USB AVR, the AVR will enumerate as a
- * virtual COM port.
- *
- * The AVR's hardware USART's settings will change to mirror as closely as
- * possible the serial settings set on the host. However, due to hardware
- * limitations, some options may not be supported (baud rates with unacceptable
- * error rates at the AVR's clock speed, data lengths other than 6, 7 or 8 bits,
- * 1.5 stop bits, parity other than none, even or odd).
- *
- * After running this project for the first time on a new computer,
- * you will need to supply the .INF file located in this project
- * project's directory as the device's driver when running under
- * Windows. This will enable Windows to use its inbuilt CDC drivers,
- * negating the need for custom drivers for the device. Other
- * Operating Systems should automatically use their own inbuilt
- * CDC-ACM drivers.
- *
- * \section Sec_Options Project Options
- *
- * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
- *
- *