# The Clog

This is the official firmware for a family of boards designed by [smores56](https://github.com/smores56),
the first of which was [the Clog](https://github.com/smores56/clog). This firmware works for the following boards:

- [The Clog](https://github.com/smores56/clog)
- [The Clog V3](https://github.com/smores56/clog-v3)
- [The Steel Toe](https://github.com/smores56/steel-toe)
- [The Sephirette](https://github.com/smores56/sephirette)

Make example for this keyboard (after setting up your build environment):

    make clog:default

Flashing example for this keyboard:

    make clog:default:flash

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

## Bootloader

Enter the bootloader in 2 ways:

* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available