# Helix

![image](https://i.imgur.com/11o4MRV.jpeg)

* Keyboard Maintainer: [MakotoKurauchi](https://github.com/MakotoKurauchi)
* Hardware Supported: Helix Pico, Beta, rev3 PCBs w/ Pro Micro compatible development board
* Hardware Availability: [Yushakobo](https://shop.yushakobo.jp), [GitHub](https://github.com/MakotoKurauchi/helix)

## Revisions
- [Pico](https://shop.yushakobo.jp/products/helixpico-pcb)
    - 4 row PCB
    - per-key RGB
    - support for a 128x32 OLED display
    - footprint for speaker
- [Beta](https://shop.yushakobo.jp/products/oss_pcb?variant=39452554231969)
    - 4 or 5 row PCB with snappable bottom row
    - per-key RGB
    - support for a 128x32 OLED display
- [rev3](https://shop.yushakobo.jp/products/2143)
    - 4 or 5 row PCB with snappable bottom row
    - per-key RGB
    - support for a 128x32 OLED display
    - rotary encoders

Make example for this keyboard (after setting up your build environment):

    make helix/pico:default
    make helix/beta:default
    make helix/rev3:default

Flashing example for this keyboard:

    make helix/pico:default:flash
    make helix/beta:default:flash
    make helix/rev3:default:flash

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

## Bootloader

Enter the bootloader in 3 ways:

* **Bootmagic reset**: Hold down the key at (0,0) in the matrix and plug in the keyboard
* **Physical reset button**: Briefly tap or double-tap the button near the TRRS jack
* **Keycode in layout**: Press the key mapped to `QK_BOOT`