[keyboard] add sweeq, a ferris/sweep variant with diodes (#21597)

1 files changed, 31 insertions, 0 deletions

diff --git a/keyboards/idank/sweeq/readme.md b/keyboards/idank/sweeq/readme.md
new file mode 100644
index 0000000000..caaf5c705f
--- /dev/null
+++ b/keyboards/idank/sweeq/readme.md
@@ -0,0 +1,31 @@
+# Sweeq
+
+![sweeq](https://i.imgur.com/TGSyHHxh.png)
+
+*Sweeq is a Ferris Sweep clone that uses diodes, instead of the latter's direct pin matrix.*
+
+The primary goal is to free up the SDA/SCL pins so they can be used by auxiliary devices such as a trackball, trackpoint or an OLED screen.
+
+Other than the diode changes and the ability to use hotswap sockets, this keyboard is identical to the original Sweep.
+
+* Keyboard Maintainer: [@idank](https://github.com/idank)
+* Hardware Supported: [sweeq](https://github.com/idank/keyboards/tree/main/sweeq)
+* Hardware Availability: *[holykeebs](https://holykeebs.com)*
+
+Make example for this keyboard (after setting up your build environment):
+
+    make idank/sweeq:default
+
+Flashing example for this keyboard:
+
+    make idank/sweeq:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available