[Keyboard] Add Loop, Nano and Work boards from Work Louder (#12756)

1 files changed, 24 insertions, 0 deletions

diff --git a/keyboards/work_louder/work_board/readme.md b/keyboards/work_louder/work_board/readme.md
new file mode 100644
index 0000000000..3e7cd9631b
--- /dev/null
+++ b/keyboards/work_louder/work_board/readme.md
@@ -0,0 +1,24 @@
+# Work Louder Work Board
+
+![work](https://worklouder.cc/wp-content/uploads/2021/02/LAST-1536x960.png)
+
+A 40% ortho keyboard with an encoder and per key and underglow RGB
+
+* Keyboard Maintainer: [Work Louder](https://github.com/drashna)
+* Hardware Supported: An ATmega32u4 based 40% with per key and underglow RGB
+* Hardware Availability: [Work Louder](https://shop.worklouder.cc/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make work_louder/work:default
+
+Flashing example for this keyboard:
+
+    make work_louder/work:default:flash
+
+Enter bootloader to flash the keyboard, you do either:
+
+    * Hold down the key in the left and top most position while plugging in the keyboard
+    * Hold the RAISE and LOWER keys and hit Q
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).