diff options
| author | Joel Challis | 2022-08-20 12:34:17 +0200 |
|---|---|---|
| committer | GitHub | 2022-08-20 12:34:17 +0200 |
| commit | d2accb48e784030637f5517dfec66b13f1eab609 (patch) | |
| tree | d151c90eeb8b804ca1f09b6aac7ed5c07fa0d90b /keyboards/ydkb/just60 | |
| parent | e7107691abac6bfa4acb96f5c3b5843d8e97f75f (diff) | |
RESET -> QK_BOOT keyboard readme (#18110)
Diffstat (limited to 'keyboards/ydkb/just60')
| -rw-r--r-- | keyboards/ydkb/just60/readme.md | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/keyboards/ydkb/just60/readme.md b/keyboards/ydkb/just60/readme.md index 1fe05bd3ea..76eee5dced 100644 --- a/keyboards/ydkb/just60/readme.md +++ b/keyboards/ydkb/just60/readme.md @@ -2,7 +2,7 @@ Just60 keyboard produced by Yang. The keyboard comes with a custom Mass Storage Device bootloader and a TMK based firmware from ydkb.io. -To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are `VCC`, `SCLK`, `MOSI`, `MISO`, `RESET`, `GND`. The `GND` is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with `avrdude`. +To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are `VCC`, `SCLK`, `MOSI`, `MISO`, `QK_BOOT`, `GND`. The `GND` is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with `avrdude`. Backlight LEDs and Bluetooth are not working yet. |