diff options
Diffstat (limited to 'keyboards/enochchau/dropout/readme.md')
| -rw-r--r-- | keyboards/enochchau/dropout/readme.md | 27 |
1 files changed, 27 insertions, 0 deletions
diff --git a/keyboards/enochchau/dropout/readme.md b/keyboards/enochchau/dropout/readme.md new file mode 100644 index 0000000000..8d595e8606 --- /dev/null +++ b/keyboards/enochchau/dropout/readme.md @@ -0,0 +1,27 @@ +# dropout + + + +A numpad with a rotary encoder. + +* Keyboard Maintainer: [Enoch Chau](https://github.com/enochchau) +* Hardware Supported: PCB w/ Pro Micro compatible development board +* Hardware Availability: [Github](https://github.com/enochchau/dropout-numpad) + +Make example for this keyboard (after setting up your build environment): + + make enochchau/dropout:default + +Flashing example for this keyboard: + + make enochchau/dropout:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the micro-controller +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available |