diff options
Diffstat (limited to 'keyboards/stardustn0/readme.md')
| -rw-r--r-- | keyboards/stardustn0/readme.md | 25 |
1 files changed, 25 insertions, 0 deletions
diff --git a/keyboards/stardustn0/readme.md b/keyboards/stardustn0/readme.md new file mode 100644 index 0000000000..5a658e9b48 --- /dev/null +++ b/keyboards/stardustn0/readme.md @@ -0,0 +1,25 @@ +# stardustn0 + + + +This project is a custom-built split ergonomic mechanical keyboard, using two Raspberry Pi Pico microcontrollers. + +* Keyboard Maintainer: [navidyt](https://github.com/navidyt) +* Hardware Supported: Raspberry Pi Pico, MX switches, Gateron hot-swap sockets, 1N4148 diodes, generic USB-C breakout board + +Make example for this keyboard (after setting up your build environment): + + make stardustn0:default + +Flashing example for this keyboard: + + make stardustn0:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the reset button on the pico while connecting USB +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available |